NBEADS 15 Sheets Heat Transfer Vinyl Sheets, 9.8"x 12" Iron On Vinyl Pack for T Shirts, Hats, Clothing, Good for Silhouette Cameo, Circuit or Heat Press Machine Tool(DIY-PH0018-63)
Price: US $19.99
Instructions: 1.Pick you design 2.Reverse the pattern and cut it onto the vinyl sheet with a craft cutter. 3.Weed out the excess to reveal the pattern. 4.Heat an iron on medium setting (320F/160C) 5.Warm the material on which the design is to be transferred. 6.Make sure there are no wrinkles on the material. 7.Place the design on to the cloth 8.Place craft paper or Teflon sheet over the vinyl sheet. 9.Use the iron with medium pressure on the pattern to transfer it to the garment. 10.Press for 10 ¨C 15 seconds over the entire pattern and remove the iron. 11.Check the design, if any part of the design lifts or peels, replace the Teflon sheet and reapply pressure for another 5 -10 seconds. 12.Peel off the backing and your garment is ready. Specification: Color: Mixed Color Size: about 250mm wide, 305mm long, 0.1mm thick Priced per 15 sheets Note: Please feel free to contact us if there is any quality problem. Due to lighting effects, monitor's brightness / contrast settings there could be some slight differences in the color tone of the pictures and the actual item. Product in the picture may look larger than the actual, Please pay attention to sizes.
Share your thoughts with other customers Write a customer review
By
NBEADS 15 Sheets Heat Transfer Vinyl Sheets, 9.8"x 12" Iron On Vinyl Pack for T Shirts, Hats, Clothing, Good for Silhouette Cameo, Circuit or Heat Press Machine Tool
Rate this product (required)
Write your review
Please enter the title.
Please enter the review.
Add PhotosPlease upload no more than 5 pictures each time. We support JPEG, PNG, JPG
images. Files must be no more than 4MB.
Notification
Each customer has only one opportunity.